Author Archive
Most new products come in and you just know right away if it is something that you will like or not. The SpiderPro Holster was not one of these products. I have tried numerous camera straps over the years and no matter what I have tried I have always gone back to my original R-Strap from the summer of 2008. It’s comfortable, has some storage on it, distributes my camera weight well, and suites my shooting style. So to say that I went into the testing process with a small amount of bias would be an understatement. This SpiderPro review was not something I whipped out one evening, I have really been putting it through its paces and using it exclusively for two and a half months to really see if it was something I would continue to use after knocking out a review. After that intro, your probably wondering what the result was…well…continue reading to find out.
Overview
The SpiderPro Holster is a unique device that allows you to place your camera on your waist and then be hands-free…and strap free until you are ready to use your camera again. For me, when I am not shooting, I am usually doing something with my hands like working with a product, helping someone to pose, or arranging items for a shot. Having a strap means that my camera is often in the way, sometimes swinging into something or getting in my way. The SpiderPro Holster securely holds your camera via a special plate on the bottom of your camera keeping is close, secure, and still easily accessible.

Features
The main parts of the Spider Holster system include the holster itself that straps to a belt that will hold your camera, the SpiderPro Plate which attaches to the bottom of your camera, and the SpiderPro Pin which attaches to the Plate and allows it to sit inside the holster.
The SpiderPro 1-Camera kit consists of the following components:
- 1 SpiderPro Camera Holster
- 1 SpiderPro Plate
- 1 SpiderPro Pin
- 1 SpiderPro Belt
Setup
There is only a small amount of prep work to get ready to use the SpiderPro. First you have to determine if you are going to wear it on your right or left side so you can put the holding stud into the correct position on the camera bracket. Next, you need to attach the bracket to the tripod mount on the bottom of your camera. The mount tightens with an Allen wrench that is stored in the camera mount bracket. Finally, you need to adjust the belt for your waist. Once you have the belt on, you are ready to start using it.
Usage
Using the SpiderPro holster is a very different experience than using a strap. Once you slide your camera into the holster, you are completely free of anything bogging you down and you are free to use your hands. I have to say, while any strap allows your hands to be free, with the SpiderPro Holster this takes that concept to a new level because there is nothing around your neck or on your shoulders, this is a very liberating feeling. The only issue I have is that I don’t feel overly secure not having any kind of strap on the camera in case the camera slips out of my hands. A simple solution to this is a wrist strap for your camera if you need that little extra piece of mind.
Keeping the camera on your waist instead of your neck and shoulders is actually more comfortable than I had expected. I position mine a little more towards my back than directly on my side so that a lens on the camera tends to ride behind me a little which helps protect my gear as I am maneuvering in tight areas.
My camera feels extremely secure in the holster even when the safety latch isn’t closed.

Results
While the SpiderHolster looked interesting when it first came out I was pretty happy with the existing strap I was using. While I was at WPPI this year I stopped by the SpiderHolster booth and really got some hands-on time with it. I was actually so impressed with it that I felt I really needed to give it a long term try. It only took a few outings with it to be convinced that it was going to be my primary way to carry my camera.
Using the SpiderHolster is comfortable and easy to use and I certainly recommend it to anyone looking for a better system.
Score Card
The SpiderHolster was pretty easy to grade since the only setup is to put the mount on the bottom of your camera and adjust it to your size. As for features, while it has a single purpose, it does it extremely well. The very nice clasp and the lock mechanism add to an already great package. The system is very easy to use and works great to help you from getting sore after carrying your gear all day. At $135 (Amazon) it isn’t cheap but is well worth it for the ease of use.
Website: http://spiderholster.com
Strap used in video: http://www.cottoncarrier.com/
Comments Off
If you have been involved in any major industry that has its own trade shows and trade publications, you may already understand how some of the “Best of The Year” and other types of awards are handed out. For those of you not privy to the behind-the-scenes action, let’s lift the lid and see how some of these awards systems work and why you need to careful about taking a major publication’s recommendation for a product.
Have you ever pulled out a copy of a major magazine’s issue of their “Best of” products and wondered why some products made it and other products didn’t? One of the main reasons is often that a major company, that has a great and innovative product, simply won’t pay the submission fee to the publication or don’t know that a submission is required. Some companies consider this to be a form of extortion and just won’t pay to have their products “considered” for an award. This also means that copycat companies can come out with a competing product and use these submission fees as a form of paid advertising. Let’s face it, if you have even a mediocre product but it gets named as one of the most innovative products of the year in what appears to be an unbiased article, this can really kick start a company.
What do these awards cost a company? Depending on the publication, they can range from several hundred dollars to several thousand dollars. An industry insider says that some publications base awards on yearly advertising and not on any reader votes while others require you to pay to have your products considered with some unknown panel making the final decision.
So how are you to know if an award is given out based on any merit at all? The reality is that you don’t. Can a small panel of judges be completely unbiased? It’s rather hard to say for sure. With many of the big name photographers being sponsored by multiple companies, conflicts of interest are quite easy to come by. Large advertising contracts are worth tens or even hundreds of thousands of dollars so there is always motivation to give big advertisers favorable reviews and awards.
Our insider goes on to tell us that the danger to a company is that if they don’t give into these types of extortion-based awards, that it leaves that category wide open for an lessor known company, or one with a poorer quality product to get this type of industry recognition.
How can you recognize these types of awards programs? It’s actually not that difficult. Looks for the same company to be mentioned in multiple categories, products that have no new innovation or unique feature winning awards, products with poor user reviews getting rewards, or an older product with no perceptible change from the previous year getting awards.
I asked our insider what the reader should consider when reading these awards articles. She says that so long as people don’t think of these as merit-based awards and instead as the thinly disguised paid advertising that most of them are, then they are less apt to base a purchase decision on an undeserved award.
Basically, the message here is reader beware. Whether its a paid award, contests claiming to give away product with no winners ever announced, or other veiled forms of marketing. Read through the disclaimers, rules, and criteria to determine exactly how these awards are being handed out before taking them at face value.
Comments Off
Lensbaby Announces Availability of Composer® Pro for Mirrorless Cameras
Now the Composer Pro delivers ultra-smooth creative control for photographers with Micro 4/3rds, Sony α NEX and Samsung NX cameras too
Portland, OR – April 2, 2012 – Lensbaby announces its popular SLR creative effects camera lens, the Composer Pro, is now also available for Micro 4/3rds cameras (including Panasonic Lumix™ G Micro System and Olympus PEN®), Sony® α NEX, and Samsung NX cameras. The Composer Pro for mirrorless cameras is compatible with the Lensbaby Optic Swap® System and ships with the Double Glass Optic installed.
The Composer Pro, launched in March 2011, refined and enhanced the popular and award winning Lensbaby Composer® by upgrading the swivel ball and focus mechanism to provide professional performance. The Composer Pro’s metal swivel ball design and refined focus mechanism deliver ultra-smooth focus and tilt control. The updated focus mechanism features a fluid and accurate dampened focus ring comparable to the focus mechanisms of the highest quality professional manual focus lenses. This smooth, fluid operation makes the Composer Pro the perfect choice for discerning professional photographers and videographers who want to create ground-breaking creative imagery – and now they can do so with their mirrorless cameras as well.
The Double Glass Optic, a 50mm f/2 selective focus optic, creates a Sweet Spot of sharp focus that photographers can move around the photo by tilting the Composer Pro’s swiveling lens body. The Composer Pro is compatible with the complete range of creative optics in the Lensbaby Optic Swap System including the Edge 80, Sweet 35, Fisheye, Soft Focus, Pinhole/Zone plate, Single Glass, and Plastic. Each optic can be swapped into the Composer Pro to deliver a different creative effect.
The Composer Pro for mirrorless cameras joins Lensbaby’s growing family of lenses, which now includes the Composer Pro for SLR cameras, Composer, Scout, Muse, and Control Freak.
“We’re excited to give mirrorless camera shooters full access to the Lensbaby Creative Effects system. With so many photographers opting for these smaller cameras for on-the-go shooting situations, our one lens with so many creative effect options will make a great addition to their set-up,” said Craig Strong, Lensbaby Co-Founder and Chief Creative Officer.
Composer Pro for Mirrorless Cameras Specs:
Refined metal ball design delivers ultra-smooth focus and tilt control
Ships with the Double Glass Optic installed
Compatible with the Lensbaby Optic Swap System
Focus Type: Manual
Size/Weight: 2.25″ (5.71cm) high x 2.5″ (6.35cm) wide / 4 oz (113.4g)
Tilt range of up to +/- 17.5 degrees
Double Glass Optic Product Specs:
Focal Length: 50mm
Low dispersion, high refractive index, multi-coated optical glass doublet
Aperture Type: Interchangeable, magnetic aperture disks
Apertures: f/2, f/2.8, f/4, f/5.6, f/8, f/11, f/16, f/22
Selective focus optic (creates a sweet spot of focus surrounded by gradual blur)
Focus distance when used with Composer Pro: 18″ to infinity
37mm front threads accept all Lensbaby accessory lenses
Composer Pro for mirrorless cameras is available now from Lensbaby-authorized photo specialty stores worldwide and from lensbaby.com. Composer Pro for mirrorless cameras retails for $300 MSRP.
Comments Off
While Lightroom 4 came out and was extremely solid, there are always a few glitches that will be found when tens of thousands of people start pounding on it. This release candidate features a number of bug fixes but for new Canon 5D MKIII owners, their cameras are now supported.
Lightroom 4.1 is now available as Release Candidates on Adobe Labs. The ‘release candidate’ label indicates that this update is well tested but would benefit from additional community testing before it is distributed automatically to all of our customers. The final release of Lightroom 4.1 may have additional corrections or camera support.
Bugs Corrected in the Lightroom 4.1 Release Candidate
The following bugs that were part the Lightroom 4 releases have been corrected. The team appreciates the very detailed feedback the community has provided on Lightroom 4 and we’re excited to correct a number of issues experienced by our customers. These issues have been FIXED:
- Point Curve adjustments made in Lightroom 3 and before have been restored.
- Lightroom 4 did not properly open external applications when using the “Edit In” functionality.
- Addressed performance issues in Lightroom 4, particularly when loading GPS track logs, using a secondary monitor, and the controls within the Develop module.
- Ability to update DNG previews and metadata for more than 100 photos has been restored.
- This update allows for improved viewing of subfolders and stacks in folders with a large number of photos.
- It was possible that a layout of a saved book could be lost after quitting Lightroom 4.
- Please provide feedback on your experience with the Lightroom 4.1 Release Candidate in our Feedback Portal.
New Camera Support in Lightroom 4.1 Release Candidate
Run over to Adobe Labs to grab the Lightroom 4.1 Release Candidate
Comments Off
Yesterday I went out with the LA Shoot This! group to help lead a group shoot event but unfortunately Mother Nature was not on our side. The sky was gray and boring and it was raining on and off. While I like nice blue skies, there was no hope of getting anything beyond dark storm clouds. My friend Chris Diset was in this same situation a few months ago and used a little white balance trick to change the color of the sky. Taking a cue from his playbook, I used that same trick to help make something out of nothing.
As I said, the sky was just downright ugly with no color in it at all, and worse, it only looked like it was going to get worse. My goal of teaching how to balance flash and bright sunlight was certainly not working out so I decided to show how to make a blue sky of of the drab sky we were looking at.
To start off, I switched the camera’s white balance from Auto to Tungsten. What this will do is to add a blue color cast to the clouds. Here is how the sky looked in both Auto and Tungsten White Balance.

Auto White Balance |

Tungsten White Balance |
Now that we have some color in the sky, its now time to shoot our model. If we just used a flash, the Tungsten white balance setting would make our subject look more like a Smurf than a human. In order to compensate for the much cooler color temperature we have to reverse that by making the light from the flash much warmer. To accomplish this, I used the ExpoImaging Rogue Gel Kit with the 1/2 CTO (Color Temperature Orange) gel.
Using the gelled flash to light our subject, we get the natural looking lighting on the subject while retaining the blue in the sky.

You can use this same technique with different gels to create more dramatic skies by using the opposite of this effect with a nice sunset. Using a cool (blue) gel and setting the color temperature to a higher temperature will create extremely vivid colors. No lighting kit is complete without at least a few color correction gels.
Comments Off
Over the past 24 hours the blogosphere has erupted with both praise and condemnation to new website by David Jay with his 10 Step Guide to Starting a Photography Business. Blog posts, tweets, and Facebook posts are mostly railing on David for some of his points while others are claiming it is about time somebody wrote a simple guide like this. Gary Fong even responded with a post about unqualified people who are trying to teach. I certainly have my own opinion and will both address some of the points David made with my own spin on them.
Step One – Friends are the foundation of your business
No, CLIENTS are the foundation of your business. Many of you may not have a lot, or any, friends that need wedding or portrait photography. I do believe that being friends with other photographers is hugely beneficial because it opens opportunities to learn, grow, and gain experience, but do not expect that a large portion of your work will be from other photographers. Your best clients will come from vendor referrals, if you can get them. You need to knock on a lot of doors, make friends with venue coordinators, florists, DJ’s, and every other vendor in your area.
Step Two – Go Ahead, Step Out In Faith, You Can Do It
David says you don’t need much equipment and you can probably borrow what you don’t have. The truth is that you do need a certain minimum of equipment if you are going to make sure that you capture every moment of the most important day in somebody’s life. You need to have at least two camera bodies and a variety of lenses to make sure you can capture the right shots. What if you drop and break a body or lens? What if you have a mechanical failure? What if something else goes horribly wrong? Equipment is not just an investment, it is insurance to make sure you can do what you were hired to do.
Step Three – Service is your true value. It is the way forward in the industry & you were created for it.
Providing service is certainly the key to customer satisfaction and I don’t think David really make any real point in his section on this except to shoot for the sake of art and not care if you get paid or not. There is certainly a truth buried in there that you do not have to be a great photographer, you just have to be good enough to deliver what your clients want. Secondly, you are selling yourself and how you treat your customers that often is more important than the product itself.
Step Four – Use the hourglass approach
David suggests you offer free service to 100 people and try to get 10 jobs. Once the jobs start coming in, you start charging for it. I can’t begin to disagree with this enough. If you shoot for free, your clients will put zero value on your work. Those free clients are not going to refer high dollar clients to you because they will not value you at all. A quick check of Craigslist will show dozens of “professional wedding photographers” in almost every major city offering complete wedding packages for $500 or less. The only clients that are going to call those photographers are ones that have to because of their budget and they fully understand that their expectations are going to be inline with what they are paying. The act of giving your work away is not going to make your phone magically start to ring with paying jobs.
Step Five – Get your photos organized, edited, and safely shared, It’s not magic, it’s workflow
Talk about a wild over-simplification here. David says to import your images into Lightroom, use automatic settings, and then your his own Lightroom preset to create great images. Lightroom is a great tool and it is my tool of choice for editing weddings, but I would never simply import, use auto-tone, run a single preset, and export the finished images. Every image should be checked for color balance, sharpness, focus, exposure, cropping, framing, awkward faces, and much more. Simply running them through a set of presets is not doing any justice to your work or to your clients. Here is a link some of David Jay’s wedding photos, you might want to check these out before taking his advice on this topic.
Step Six – Honestly and authentically you. Market your brand proactively for the best first impressions
I absolutely agree that you should be honest and authentic. However, David says you should also be cute, well dressed, and talk about your dog. David does make some good points about important pieces to have on your website like your phone number, your prices, and a video. Having a little promo video is really a good idea as it can give your potential client some insight into what you are like and how you work. David also goes into a lot of detail about using Facebook, and when done correctly, I do agree that Facebook is a great marketing tool.
Step Seven – They pay you to be prepared. Get ready
This is probably the best set of information in David’s guide. You should have checklists, you need to have your gear ready, you need to have backup equipment (or as David suggests, friends with equipment that will gladly let you use their gear)…and of course, you need to buy David’s website tools to create a custom website for your customer. Ok, I am on board with almost all of that but I have yet to have a couple that wanted their own website for their wedding even if I was giving it to them for free.
Step Eight – It’s your time, Get in the game
I can’t actually fathom that David would suggest shooting a wedding with no experience. A wedding has a flow to it, it has a cast of characters, it has a specific timing. If you don’t fully understand the nuances that are involved you will not be ready. You absolutely need experience with weddings, and a good number of them too, before you try to be the main photographer for such a special event. You should intern with existing wedding photographers, work up to being a second shooter, and then work into getting to be the primary while an experienced photographer is your second. Would you like to have a doctor that has never practiced an operation before doing a surgery on you? A auto mechanic doing your car’s brakes who is “just winging it”. If you wouldn’t trust an inexperienced person to handle your important work, why would you think it is ok to risk someone’s wedding photos? To even suggest that you should just shoot as many pictures as possible and hope for a few good ones is simply ludicrous.
Step Nine – Your clients want you, not your prints
Yes, you do need to understand what you are selling and often we are not selling prints anymore but what we are selling are memories. If you cannot capture the essence and spirit of the event, and if you can’t freeze those important moments in time that people will treasure for the rest of their lives, than you shouldn’t be doing it. David does suggest that one of the best products to sell is a customized website, using the products that he sells, again along with a $29 a year recurring fee for hosting their images…surely all of your clients will pay you for many years to come to have their images online.
Step Ten – Let client demand decide, price step
Just follow David’s simple tips and be making $120,000 a year in your third year of business. You built a huge demand for your free wedding services and now its time to get rich. Forget about vendor relationships, advertising, marketing, just build up demand by not charging, then start charging and you are all set. I’m sorry folks, if it was this easy, we would all be rich.
What’s not in David’s Guide
What is not in David’s guide…in a word…reality. Let’s face some facts here, not everyone is going to make it as a wedding photographer. I am not trying to blow anyone’s dreams or aspirations here but the harsh fact is that not everybody has what it takes. First off, you need to be a good photographer and this means having both creative and technical skills and that is just not everyone’s skill set. I know extremely creative and artistic people who simply can’t take a good photo and I know highly skilled technical photographers with no creative ability to get great shots. Secondly, you have to be good at business. The business of photography requires scheduling, meetings, accounting, planning, time management, and many other real business skills. Again, not everyone is cut out to run their own business. You will likely spend 90% of your time running your business than actually shooting and this is a harsh reality that people like David will never tell you about because its not exciting, its not sexy, and its not going to motivate you.
If you want to have a successful photography business you need to understand that it is going to take a lot more than a cool website and some basic equipment.
One last point, to address Gary’s post, I may not be a hot, fabulous woman, but I do love my LensSkins on my 70-200!

Comments Off
Wearable point of view camera are all the rage right now with everyone that is doing any kind of action sport strapping cameras on to give the viewer a sense of what he/she was seeing. a newcomer to this field is Midland Radio….yes…I said Midland Radio…the same company many of us older folk knew and loved back in the CB radio craze. (yesssum, that was before all these crazy internets). Those of us who chose Midland gear did so because the stuff just worked so when I saw that Midland had an action camera, I just had to get my hands on it and give it a test drive.
Did Midland score a win with the XTC300VP4? There is only one way to find out….put it to the test!
Features
There are not a whole ton of features, settings, dials, inputs, outputs or really much of anything to the XTC300VP4. The camera is what it is, and what it is, is a video camera. There are only three settings shooting modes:
- 1920×1080 High Definition @ 30 FPS (16:9 Aspect Ratio)
- 1280×720 High Definition @ 60FPS (16:9 Aspect Ratio)
- 848 x 480 Standard Definition @ 60FPS (16:9 Aspect Ratio)
There are only two controls on the entire camera, the on/off slide switch and the video resolution switch. There are no menus to dig through, cryptic codes to remember, just set the video resolution you want and turn it on to start filming.
Highlights:
- 1080p True HD Wearable Action Camera
- First Person Point Of View Video & Audio
- Records with the flip of a switch
- Includes Submersible Case and 4 Different Mounts
- Multi-Coated tempered glass lens
- Focus: 5 inches to infinity
- Aspect Ratio: 16 x 9
- Video Format: MPEG4 / H.264
- Audio: AAC
- Light Sensitivity: 1.4 V/Lux second
- Transfer: USB 2.0
- Power: 1100 mAH (up to 5 hours recording time)
Key Features:
- Records to a Micro SD Card
- 127˚ Wide Angle Lens (1080p)
- Records 30 frames/sec (60 frames/sec at 720p setting)
- Includes a LI-Ion 1100 mAH battery pack
- Weather Resistant
Setup
With a camera this simple, there isn’t much to the setup process. Plug the USB cable into the camera and then into the AC adapter, car adapter, or into a computer to start charging the battery. You will need to supply a Micro SD card as one is not included.
With the battery charged, a Micro SD card in place, simple select the video resolution you want as follows:
| Position |
Resolution |
Frame Rate |
Viewing Angle |
| Top Position |
1080p (1920×1280) |
30fps |
127° |
| Middle Position |
720p (1280×720) |
60fps |
170° |
| Bottom Position |
480p (840×480) |
60fps |
170° |
To start filming just slide the large switch on top towards the front of the camera.
Usage
These days I am not much of an action sports kind of guy but I do fly radio control helicopters and multi-rotor copters (see http://droneflyers.com). With these aircraft I do some aerial photography and video for fun. The “go to camera” has been the GoPro HD Hero camera with it’s lightweight and good image quality. The downside to the GoPro is that to really mount it to anything you need to use the heavy waterproof case that comes with it.
The Midland XTC300VP4 however, has a standard 1/4″ thread on the bottom for attaching to a regular tripod or quick connect plate. This can really cut down on the overall platform weight.
The only time you need the waterproof enclosure is if you are taking the camera into the water.
My biggest gripe about these types of cameras is the ultra wide-angle of the lens. While not a true fisheye lens, its pretty darned close. While this may work for some things, it’s often a bit much for my taste and what I would like to shoot. With a 127 degree field of view, the image will have a bit of distortion.
The following video clip demonstrates how the video looks and how the camera deals with going from bright to dim conditions and how it handles backlit images.
http://www.youtube.com/watch?v=f2izaw9p5O4
In order to make cameras at these price points, they use essentially the same sensors found in camera phones. Since there is no mechanical shutter, they take an image by scanning one line at a time from the top to the bottom of the sensor. The problem with this rolling shutter is that a fast-moving object may move from when the scanning started and when it finishes. When this happens you get what is referred to as “the Jell-O effect”.
The XTC300VP4 suffers from this rolling shutter issue which didn’t really come as a surprise considering the price point. This is only a problem under certain conditions and is less noticeable when shooting in 720p mode because the shutter is working faster.
The following video demonstrates this rolling shutter issue. Keep in mind that this is NOT unique to the XTX300VP4, all the small action cameras in this class have the same issue.
http://www.youtube.com/watch?v=tJ80VmH0FOA
This next video puts the XTC300VP4 on a tripod to shoot a fast-moving QuadCopter.
http://www.youtube.com/watch?v=ZG5ABbLG2e4
In this last video, a white streak is visible in the top and a lens flare is visible in the lower middle of the frame. Without a lens hood and with such a wide-angle lens, getting a piece of the Sun in the shot is bound to happen.
As I explain in the video, the tripod mount on the bottom of the camera is not deep enough for most tripods and mounts. With most tripods you can’t tighten the camera down onto the mount tightly. With the tripod I used the camera would have a tendency to just spin around making it hard to set up a good shot.
Results
The XTC300VP4 will set you back $249 which is in the same ballpark as the GoPro and Coutour cameras so making a decision isn’t really a price issue. The XTC’s streamlined design may fit certain situations better than the much wider GoPro. While I really wish the field of view was adjustable I can’t knock the XTC for it considering other action cameras are the same or even worse.
The simplicity of the XTC300VP4 is what really sets it apart from the crowd. While some of the competitors in this field also shoot stills, their ultra wide-angle is better suited to video than stills. By sticking just to shooting video, the XTC300VP4 has taking simplicity to new levels that anyone can use even if they are wearing thick skiing gloves. The lower resolution mode doesn’t change the frame rate although the smaller image size would mean you can fit more video onto one card. The XTC300VP4 comes with a nice choice of mounting options and a very nice touch is both an AC charger and a car accessory port charger.
Score Card
The XTC300VP4 gets high marks for its dead simple setup and one-touch control. Since it can be operated even with thick gloves on, the usage score gets high marks as well. The features category takes a small hit due to not having the ability to take stills and the super wide-angle field of view. The final results category took a minimal hit due to the rolling shutter issue which, although it is problematic when the camera is being flown, not everyone will have a major issue with. The overall value gets full marks for the nice accessory package that comes standard and the price point is in the middle ground of the competition.
Midland Website: http://midlandradio.com
Comments Off
Photoshop CS6 Beta Now Available on Adobe Labs
First Major Release since April 2010 Packed with New Features and Huge Performance Enhancements
Adobe Systems Incorporated (Nasdaq:ADBE) today announced Adobe Photoshop CS6 beta, a preview of what’s to come in the next release of the industry standard in digital imaging, is available as a free download from Adobe Labs. Customers can download the beta, try out the experience and provide feedback to the product team. Packed with groundbreaking new innovations, features and incredible performance enhancements, Photoshop CS6 beta is available for the Mac OS and Microsoft Windows platforms. The final release is expected in the first half of 2012.
“Photoshop CS6 will be a milestone release that pushes the boundaries of imaging innovation with incredible speed and performance,” said Winston Hendrickson, vice president products, Creative Media Solutions, Adobe. “We couldn’t wait to share this beta of Photoshop CS6 with our customers and are looking forward to hearing from them and seeing the ways they are incorporating the beta into their daily creative workflows.”
New Features in Photoshop CS6 Beta
Photoshop CS6 beta demonstrates Adobe’s focus on huge performance enhancements, imaging magic and creativity tools that offer customers a new experience in digital imaging. Key features include new additions to the Content-Aware tools: Content-Aware Patch allows greater control by letting users select and duplicate an area of an image to fill in or “patch” another. Content-Aware Move lets users select and magically move an object to a new place in the image.
Customers will experience incredible performance, powered by the new Adobe Mercury Graphics Engine, enabling near-instant results from popular editing tools including Liquify, Puppet Warp, Transform and Lighting Effects; and a refined, modern interface featuring dark UI options to make images pop. New and re-engineered design tools make creating designs faster and more efficient. Vector layers allow users to apply dashed lines and gradient strokes, searchable layers help quickly zero in on any layer you need, and new type styles let designers quickly apply type treatments to their designs.
In addition, the Photoshop CS6 beta offers all the features of Adobe Photoshop CS6 and Adobe Photoshop CS6 Extended, such as new 3D editing features and quantitative imaging analysis capabilities. These features will be included in the shipping version of Photoshop CS6 Extended when it becomes available.
Pricing and Availability
The Photoshop CS6 beta is available immediately as a free download in English and Japanese. At installation, users will be required to provide an Adobe ID to complete a one-time login and online product activation. For information on how to install Photoshop CS6 beta visit http://www.adobe.com/go/photoshopcs6. Customers can submit feedback via the Photoshop CS6 beta forum: http://www.adobe.com/go/pscs6_forum. Users can also connect with the Photoshop team via the community-powered site: http://feedback.photoshop.com; on Facebook: http://www.facebook.com/Photoshop; YouTube: http://www.youtube.com/photoshop; Photoshop.com blog: http://blogs.adobe.com/photoshopdotcom/; or via Twitter: http://twitter.com/photoshop.
Adobe Photoshop Family
Adobe Photoshop and Photoshop Extended are at the heart of the Photoshop family, joined by solutions for users at every level who want to bring out the best in their digital images either at home, in the office or on the go. Coupled with Adobe Photoshop, the recently released Adobe Photoshop Lightroom 4 addresses the workflow needs of amateur and professional photographers, helping them create, manage and showcase images in impactful ways. Adobe Photoshop Elements provides consumers with powerful yet easy-to-use tools that organize, edit, create and share photos memories. For mobile devices, the Adobe Photoshop Touch app transforms images with core Photoshop features custom-built for tablets; and Photoshop Express is a free app for simple photo fixes and enhancements, and sharing to social networks.
About Adobe Systems Incorporated
Adobe is changing the world through digital experiences. For more information, visit www.adobe.com.
Comments Off
Kerry’s Quick Shot: The Nexto DI NVS1501 is flat out the fastest and most reliable backup device I have ever used. I simply won’t leave home without it!
Last year I took my wife to Maui for our anniversary and on the very first day the hard drive in my laptop crashed. At the time I had the Nexto DI eXtreme portable storage which allowed me to quickly back up my CF cards each night. Without a portable backup solution, I would have been nervous about losing my data until I got home. Data loss is the ultimate enemy of the photographer so the sooner you get a backup the better off you are. With more and more video projects coming in, I wanted to make sure I had a backup solution for video files as well as still images and the Nexto DI NVS1501 was an obvious choice since I had liked the Nexto DI eXtreme so much. Let’s take a look and see if the NVS1501 is a worthy successor to the eXtreme.

Features
While the very unassuming case features only an On/Off button and a single small joystick style control, the system itself is actually crammed with features.
In addition to backing up your memory cards, the NVS1501 also allows you to copy your files onto other devices, such as USB drives or memory cards, using an external card reader or the optional Ikegami GFPAK. Data can also be burned directly to Blu-ray Discs.
Nexto DI gave this device safety features such as shock protection, in the form of a built-in free-fall sensor and rubber bumpers. The NVS1501 can also detect and recover from bad sectors by moving data to a safe sector.
- Back Up from Various Memory Cards
- Offload data from various memory cards (CF, Microdrive, SDHC, SDXC, MS) up to 500 GB
- Supports SDXC
- The NVS1501 supports the exFAT file system used in SDXC.
- Copy Mode and Performance
- Fast Copy: Make a new folder and copy all the memory card data into the folder
Copy and Verify: Same as Fast Copy, but after copying, the data on the memory card is compared with the copied data on the NVS1501 hard drive. Each bit is verified
Safe Copy: Before copying data, the NVS1501 verifies that its hard drive area is safe. If a bad sector is detected, a new, safe area is found – then copying (Fast Copy) will begin
- Performance
- CF: 80 MB/s – 6 minutes, 40 seconds to transfer 32 GB
SDHC/SDXC: 22 MB/s – 24 minutes, 14 seconds to transfer 32 GB
SDHC/SDXC, UHS-1: 60 MB/s – 8 minutes, 53 seconds to transfer 32 GB
MS: 12 MB/s – 44 minutes, 26 seconds to transfer 32 GB
- Preview Video and Photo Clip
- User can preview video and photo clips with the built-in color LCD. A preview of both files on internal HDD and external device (CF, SDHC, SDXC, MS, USB external HDD) is supported
- Making a Secondary Copy to USB Hard Drive
- User can generate (sync) a second copy onto an external USB HDD. Export internal data to an external USB hard drive without needing a laptop. Each time you plug in an external USB hard drive to the NVS1501, any files recorded since the last sync will be transferred. Automatically compare the video folders by file names and sizesThe wall power adapter should be connected to both the NVS1501 and the USB external hard drive. Supports copy from USB card reader or GFPAK using USB host connectivity through eSATA/USB combo port
- Multi-Copy Onto Two Separate HDD at the Same Time
- MCopy (Multi-Copy) enables mirrored data to be copied onto the NVS1501 and an external USB HDD at the same time, to achieve maximum data safety
- Designed for Data Safety Shock Protection
- Featuring advanced data management capabilities including Recover folder from bad sector, shock protection and success (or failure) feedback of previous backup operationShock protection:
1. Built-in free-fall sensor
The NVS1501 senses when it’s being dropped – it will be triggered to move the read/write head of the HDD away from platter, parking at its original position. The main power will be automatically switched-off
2. Supplied with Rubber Bumpers
A pair of rubber bumper supplied for an additional protectionBad Sector Recovery
If a video folder contains a bad sector the NVS1501 recovers the video folder. It copies data onto good sectors and replaces unusable sectors with a format dependent on dummy sectors. The frames that contain dummy sectors block noises but the rest of frames become usableSuccess (or Failure) Feedback
Next time you switch on the NVS1501, it will display the previous backup result, in order to help the user to determine the deletion of data stored on the memory card
- Using the NVS1501 As a Hard Drive
- Supports high-speed data transfer to NLE systemIEEE1394b (FireWire 800): 75 MB/s – 7 minutes, 10 seconds to transfer 32 GB
USB 2.0: 33 MB/s – 16 minutes, 17 seconds to transfer 32 GB
- Versatile Power Options
- Its built-in internal battery makes the NVS1501 the perfect companion for working in the field. The NVS1501 can also be powered by the power adapter, interface cables, a ‘AA’ battery holder, or external battery
Specifications
| Capacity |
500 GB |
| Compatible Memory Cards |
CF Type 1/2, Microdrive
SD, SDHC, SDXC, MS, MS Pro-HG, MS Pro MagicGate |
| Hard Drive Support |
USB 2.0: 480 Mb/s |
| LCD |
2.4″ (6.1 cm) color TFT LCD, 320 x 240, 64K colors |
| Interface |
USB 2.0: 480 Mb/s
IEEE 1394b (FireWire 800): 800 Mb/s |
| Battery |
Internal: 3.7 V, 4400 mA rechargeable lithium-polymer battery (120 minutes) |
| Power |
Power input: 100-240 V AC
Output power: 12 V/1 A DC
Bus power operation: Operate with USB bus power or IEEE 1394b (FireWire 800) cable power |
| Utilities |
Internal hard drive: FAT32 / exFAT
Memory card (including SxS): FAT 12/16/32exFAT |
| OS Compatibility |
Windows 7, Vista, XP, 2000, ME
Mac OS 9.2 or above, Linux 2, 4, 18 or above |
| Dimensions |
6.1 x 3.6 x 1.3″ (15.5 x 9.1 x 3.3 cm) |
| Weight |
0.94 lb / 0.43 kg |
- Charging Time
- Approximately 5 hours via power adapter / FireWire 800
Approximately 9 hours via interface cable
Approximately 10 hours via ‘AA’ battery holder
Setup
Other than charging the battery, there isn’t anything to setup. I plugged the NVS1501 into my laptop overnight to make sure it had a good full charge on it. Aside from that, you are ready to plug your memory cards in and start backing up.
If you are going to backup to a secondary device, you will want to plug that in and make sure everything is working correctly, for me, I just use the NVS1501 as my initial CF card reader after a shoot, then I plug it into my computer as an external drive to copy the files to the computer for processing. Each night, automatic processes backup the processing system to redundant storage systems, only after I have verified that those backups worked properly do I remove them from the NVS1501. This helps to ensure that I never lose any data.
Usage
As I mentioned, the NVS1501 has a very simple interface with only a single directional controller aside from the power switch. When the system powers up, the initial screen you get will say “XCopy Ready”, at this point you can insert your memory card.

Once you select the copy method, it just blazes through the copy process. If you are a wedding photographer that uses a second shooter, this is a HUGE time saver for you, within only a few minutes you can back up your second shooter’s cards and send them on their way. I use 16gb cards for everything and the typical backup takes about three minutes.
My big gripe about the earlier Nexto eXtreme was the eXtremely tiny LCD display, it was almost impossible to read and had no preview function. While the NVS1501 does have a larger color LCD and does support both still and video playback the screen is still too small to check images for focus and delete images you don’t want.
For some people, also being able to do a secondary backup to another device is a really big deal, especially if you are on the road for extended periods of time before getting back to the office to dump your files.
Probably the biggest improvements, besides the faster transfer, larger LCD, and massive storage, are the safety features. With both free-fall and shock detection, your system is likely to survive falls and bumps that would destroy competing systems.
Results
If you believe in the phrase “you get what you pay for” than you will certainly apply that to the NVS1501. Coming in at $999.99, the NVS1501 is not cheap by any standard but when compared to its biggest rival, the Epson P-7000 at $799.99 the Nexto DI NVS1501 wins in a number of areas including storage (500gb vs 160gb), speed, security, safety, and reliability. To give Epson credit, the P-7000 wins on the display side with a large clear LCD that really allows you to manage and display images and video.
For the photographer on the go, the NVS1501 is a big investment but if you value the security of your images and want the speed that the NVS1501 delivers, than you will find it to be well worth the price.
Score Card
The Nexto DI NVS1501 scores top marks for its ease of use, speed, safety features, and overall design. I did ding the NVS1501 on the features due only to the small screen. Even with the small screen, a better job could be done on the image preview and file management, both things that could be solved with a software update.
On the overall value, I did knock off a point because of the price tag. While the NVS1501 is certainly a valuable tool it is priced out of the range of many people. Fortunately, there are products available from as low as $200 but you will be sacrificing the speed and durability of the NVS1501.
Website: http://www.nextodiusa.com/
Comments Off
Lightroom 4 is a major release, adding significant new capabilities and innovations. New adjustment controls maximize dynamic range from cameras, recovering exceptional shadow details and highlights. The software features new and improved auto adjustments to dynamically set values for exposure and contrast, and additional local adjustment controls including Noise Reduction, Moire and White Balance.
Changes since the public beta:
- Reverse geocoding now available in the Map Module
- Revamped and improved auto tone in Develop based on new controls
- Increased range of local white balance controls (temperature and tint)
- Updated Develop presets plus added new presets for video
- Maximum Blurb book size is now 240 pages
- Over 800 bugs found and fixed! (Thank you Lightroom 4 beta customers!)
Lightroom 4 provides photographers the tools to create beautiful photo books with text controls and a variety of easy-to-use templates, as well as a direct link for photo book creation from within the new Book module. A new intuitive Map module displays images already assigned a location, provides location tagging and reverse geo-tagging controls and saved locations for easy assignment of a photographer’s common locations.
Now, native video support gives photographers the capability to play, trim and extract frames from video clips shot on DSLRs, point-and-shoot cameras and smartphones. Video-specific presets and many standard Lightroom image adjustment controls can be applied to video clips, and adjusted videos can be exported as a H.264 file or published directly to Facebook or Flickr.
In the Develop module, presets fully utilize new processing technology and the addition of soft proofing helps photographers tune images in a destination color space to ensure content looks its best. In addition, customers can now email images directly from Lightroom using an email account of their choice.
Pricing and Availability
Adobe Photoshop Lightroom 4 is now available for Mac and Windows at www.adobe.com/store. The estimated street price is US$149 for new users or US$79 for upgrades. For more detailed information about product features, upgrade policies, pricing and language versions, please visit www.adobe.com/go/lightroom.
Comments Off
In this episode, I tackle some readers questions that have been sent in.During this episode we talking about fixing exposure issues, bouncing light, using reflectors, shooting groups of people, rechargeable batteries, and a handful of other topics.
This one was recorded in our cargo van so the noise reduction makes it sound pretty tiney. I apologize for the poor audio quality.

Host: Kerry Garrison
Comments Off
With different camera bodies, lenses, and countless accessories available, deciding what to buy that will really make a difference is often very difficult. In this episode Kerry Garrison discusses how to go about picking out the right gear.

Host: Kerry Garrison
Sponsors: GoPro, Blackbelt Lighting
Comments Off
It’s hard to believe that Camera Dojo has been going for five years now. When it started there were not a whole lot of sites out there with good information, tutorials, and product reviews, today there are literally hundreds. I may not post content as much as some people but I have tried to always have good quality material that is as unbiased as possible with the only goal being to help people take better photographs.
Originally called L7 Foto (the L and 7 looking like an open box for ‘think outside the box) and renamed Camera Dojo in 2008 since so many people had issues with the F instead of PH.
I think I really innovated the photography podcast with almost 100 conversations with industry leaders. The first iteration of the podcast was completely unscripted and was never a simple Q&A session. After a hiatus to try to figure out how to re-invent the show, the GoCast was created with just myself as I drive to and from clients, shoots, or other locations sharing my thoughts on a particular topic.
In November of 2010 we launched Blackbelt Lighting Products as a sister site to Camera Dojo to sell good quality lighting equipment at the best prices we could. Blackbelt Lighting grew from just two products to a complete lineup in a very short period of time and continues to evolve and grow.
Looking back, I think I have done a pretty good job of keeping the content fresh, relative, and educational while striving to be as interesting and entertaining as possible. Over the years it has not been the love of the site, a competitive issue, and certainly not money that has kept Camera Dojo alive…it has been the readers. The emails I receive from some of you that something I said or wrote made a huge difference for you, that it changed your photography, or helped your business. Just knowing that I have made even a small difference in some people’s lives has meant everything to me and I very much appreciate hearing from everyone that has ever written in.
Now on to you…what would you like to see? What type of content do you need? Camera Dojo was not intended to be all about me spouting whatever I felt like every week. It has always, and will continue to be driven by the needs and requirements of its readers so let me know what you would like. Feel free to comment below or shoot me an email.
I want to thank all of you for being here, supporting the website, and giving me feedback. I also have to thank all of the sponsors who have graciously given of equipment, resources, and time to help me create content for you. Please support the sponsors of the site as they are some of the best companies in the industry and I couldn’t have done what I have done without them.
So what is in store for The Dojo? You have seen some articles lately relating to video, so look for that to be a big influencer not just on the content, but also in how the content is going to be presented. In 2012 we are going to launch some completely new concepts in photography education, maybe some of the ideas will work, maybe some won’t, but I have never been the type of person to not try something for fear it won’t work. In the end, it will be you, the Camera Dojo audience that will decide what works and what doesn’t. Maybe some of the ideas will need to be tweaked to work properly, but rest assured, I will continue to strive to provide the best content I possibly can and make it as entertaining as possible,
Comments Off
Adobe has just announced the latest iteration of their popular image processing tool, Photoshop Lightroom 4. Lightroom 4 adds a number of interesting new features include a Map module for working with GPS tagged images and a new Book module for creating photo books. Enhancements to existing features include new shadow and highlight tools that can add much more dynamic range to your image, improved video file support, soft proofing, and new features in the local adjustment tool.
In the following video, Kerry Garrison does a quick overview of some of the new features. Stay tuned for a complete Lightroom 4 Learning Center launching here on CameraDojo.com in the next few days.

To download a copy of the Lightroom 4 beta, please visit http://labs.adobe.com
Comments Off
In this episode, Kerry Garrison talks about making the most out of your new photography gear that you just got for the holidays. During this show, Kerry discusses what things you may want to look at next, how to go about planning future purchases, and how to make the most out of your photography budget. If you have additional tips, please add them to the comments.

Host: Kerry Garrison
Sponsors: GoPro, BlackBelt Lighting
Comments Off
|